Digital In Out Sample

This sample demonstrates digital port read and write.

To run the sample:

1. Download the sample code from https://github.com/Turta-io/LoRaHAT/blob/master/Samples/Python/digital_port_in_out.py

2. Copy the sample code to a folder on the Raspberry Pi.

3. Open terminal, and then go to the folder you copied the sample.

4. Run the sample with the following command:

python3 digital_port_in_out.py

Sample Code

digital_port_in_out.py

#!/usr/bin/env python3

#This sample demonstrates digital port read and write.
#Install LoRa HAT library with "pip3 install turta-lorahat"

from time import sleep
from turta_lorahat import Turta_Digital

#Initialize
#Set left digital port as output, right digital port as input
digital = Turta_Digital.DigitalPort(False, False, True, True)

try:
    while True:
        #Turn pin 1 on
        digital.write(1, True)
        print("Pin 1 is set to high.")

        #Wait
        sleep(1.0)

        #Turn pin 1 off
        digital.write(1, False)
        print("Pin 1 is set to low.")

        #Wait
        sleep(1.0)

        #Toggle pin 2
        #Toggling inverts the pin state
        digital.toggle(2)
        print("Pin 2 is inverted to " + ("high." if digital.read(2) else "low."))

        #Wait
        sleep(1.0)

        #Read pin 3 and 4
        pin3 = digital.read(3)
        pin4 = digital.read(4)

        #Print pin 3 and 4 states
        print("Pin 3 state is " + ("high." if pin3 else "low."))
        print("Pin 4 state is " + ("high." if pin4 else "low."))

        #Wait
        sleep(1.0)

#Exit on CTRL+C
except KeyboardInterrupt:
    print('Bye.')

Result

When you run the sample, it toggles digital port 1 and reads digital port 2. The example output should be like this:

Pin 1 is set to high.
Pin 1 is set to low.
Pin 2 is inverted to high.
Pin 3 state is low.
Pin 4 state is low.
Pin 1 is set to high.
Pin 1 is set to low.
Pin 2 is inverted to low.
Pin 3 state is low.
Pin 4 state is low.

To stop the Python script, just press CTRL + C.